Crimped Wire Wheel Brushes - Narrow Face
Wheel Brushes
Mill-Rose crimped wire wheel brushes with a narrow face feature precision-formed crimps in each wire. This imparts a slight flexing action for a more gentle brushing action without reducing the efficiency of the brush in surface cleaning and texturing operations. Slight "knee-action" in the bristles produces some "give" in the wires to soften the impact angle of each wire against the surface being brushed.
Mill-Rose crimped wire wheel brushes are available in a wide range of sizes with your choice of long or short bristles. The short bristles produce a stiffer impact. We offer our wheel brushes in high carbon steel, and stainless steel. Other materials such as brass, copper, etc. are available upon request. Special dimensions are also available upon request.
| H/C Steel | Stainless Steel | Diameter | Wire Size | Arbor Hole | Trim Length | Face Width | M.S.F.S. (R.P.M.S.) |
|---|---|---|---|---|---|---|---|
| 72704 | 3" | .006 | 3/8-1/2" | 1/2" | 3/8" | 6000 | |
| 72714 | 3" | .0118 | 3/8-1/2" | 1/2" | 3/8" | 6000 | |
| 72724 | 72734 | 4" | .006 | 3/8-1/2" | 13/16" | 3/8" | 6000 |
| 72744 | 4" | .008 | 3/8-1/2" | 13/16" | 3/8" | 6000 | |
| 72754 | 4" | .0095 | 3/8-1/2" | 13/16" | 3/8" | 6000 | |
| 72764 | 72774 | 4" | .0118 | 3/8-1/2" | 13/16" | 3/8" | 6000 |
| 72784 | 4" | .014 | 3/8-1/2" | 13/16" | 3/8" | 6000 | |
| 72795 | 72805 | 6" | .006 | 1/2-5/8" | 1-7/16" | 3/8" | 6000 |
| 72815 | 6" | .008 | 1/2-5/8" | 1-7/16" | 3/8" | 6000 | |
| 72825 | 72835 | 6" | .0104 | 1/2-5/8" | 1-7/16" | 3/8" | 6000 |
| 72845 | 72855 | 6" | .0118 | 1/2-5/8" | 1-7/16" | 3/8" | 6000 |
| 72865 | 6" | .014 | 1/2-5/8" | 1-7/16" | 3/8" | 6000 | |
| 72875 | 72885 | 8" | .006 | 1/2-5/8" | 2-1/16" | 3/8" | 6000 |
| 72895 | 8" | .008 | 1/2-5/8" | 2-1/16" | 3/8" | 6000 | |
| 72905 | 8" | .0104 | 1/2-5/8" | 2-1/16" | 3/8" | 6000 | |
| 72915 | 72925 | 8" | .0118 | 1/2-5/8" | 2-1/16" | 3/8" | 6000 |
| 72935 | 8" | .014 | 1/2-5/8" | 2-1/16" | 3/8" | 6000 | |
| 72948 | 10" | .0118 | 3/4" | 2-3/8" | 3/4" | 3000 | |
| 72958 | 72968 | 10" | .014 | 3/4" | 2-3/8" | 3/4" | 3000 |
| 72978 | 12" | .006 | 1-1/4" | 2-15/16" | 3/4" | 3000 | |
| 72988 | 12" | .0104 | 1-1/4" | 2-15/16" | 3/4" | 3000 | |
| 72998 | 12" | .0118 | 1-1/4" | 2-15/16" | 3/4" | 3000 | |
| 73008 | 12" | .014 | 1-1/4" | 2-15/16" | 3/4" | 3000 | |
| 73018 | 15" | .0118 | 1-1/4" | 4-7/16" | 3/4" | 3000 | |
| 73028 | 15" | .014 | 1-1/4" | 4-7/16" | 3/4" | 3000 |
| Arbor Change Information | Arbor Hole | Last Digit |
|---|---|---|
|
If an arbor hole is required that is different than the arbor hole listed, please specify the difference by changing the last digit only of the catalog number to comply with the arbor hole chart.
|
1/4" | 1 |
| 3/8" | 2 | |
| 1/2" | 3 | |
| 1/2"-3/8" Reduced | 4 | |
| 5/8"-1/2" Reduced | 5 | |
| 5/8"-11" Thread | 6 | |
| 5/8" | 7 | |
| 3/4" | 8 | |
| 1-1/4" | 9 | |
| Other (Specify) | 0 |